Firewall configuration
Open on the firewall the ports, which are used for accessing MiaRec from other computers on the network/Interenet
Open ports for MiaRec
MiaRec uses following ports, which should be opened on firewall:
| Port | Description |
|---|---|
| 80 (TCP) | MiaRec Web-portal (HTTP protocol) It is possible to change this port to other value during installation (for example, to 8080). |
| 443 (TCP) | MiaRec Web-portal (HTTPS protocol) |
6554 (TCP) |
Live monitoring (RTSP signaling). If live monitoring is not used, then this port can be closed on firewall. |
7000 - 7999 (UDP) |
Live monitoring (RTP audio). If live monitoring is not used, then these ports can be closed on firewall. |
| 5070 (TCP) | Cisco SIP trunk recording signaling (SIP protocol) - for Cisco UCM only |
| 20000 - 21999 (UDP) | Cisco SIP trunk recording media (RTP protocol) - for Cisco UCM only |
| 5080 (TCP, UDP) | SIPREC recording signaling (SIP protocol) - for SIPREC recording only |
| 22000 - 23999 (UDP) | SIPREC recording media (RTP protocol) - for SIPREC recording only |
| 32000 - 33999 (UDP) | Avaya DMCC recording media (RTP protocol) - for Avaya DMCC recording interface only |
| 6091 (TCP) | Screen recording controller, unencrypted (optional) |
| 6092 (TCP) | Screen recording controller, encrypted (TLS) |